After bootloading a 16f877a how can i get back rx tx ?

[camolas]

Hi,

After bootloading a 16f877a how can i get back rx(c.7) tx(c.6) to use the serin and serout in my code?
The bootload is the Screamer-v14 .They say "...Bloader will turn off the UART (CREN = 0 and TXEN = 0) upon exiting the boot loader program. If you program uses the UART, you will need to re-initialize the UART with your own settings.... "

How can i do this?

Thanks for all the hellp

byby


my code: