I am trying to lay out a board for the 18F6680 68 pin PLCC.
There are four pins that are N/C.
Can they be connected to the ground plane?
I am trying to lay out a board for the 18F6680 68 pin PLCC.
There are four pins that are N/C.
Can they be connected to the ground plane?
Dave
Always wear safety glasses while programming.
Yes, anyways there's unconnected in the PIC... you can even left them unconnected.
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
Thanks!!
I was hoping that was the case. The way the socket is laid out I will be able to run a "wide" trace to VSS going through the N/C pins. Or cut them off.
Dave
Always wear safety glasses while programming.
Bookmarks