Need some advice.


Results 1 to 24 of 24

Threaded View

  1. #16
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653


    Did you find this post helpful? Yes | No

    Wink

    Hi, Sayzer


    WHILE temp conversion ...

    REGULATOR loops ...

    of course !

    just have to verify that the Process time. constant is 10 times or more the sensor time constant ...

    If you want it to look at, I committed sometimes ago a DS 1820 temp regulator : a R/C servo drives air flow section to cool some heating stuff ...

    Let's say it is intended to control the air flaps of a model "Corsair F4U " engine cowling ...

    Alain
    Last edited by Acetronics2; - 30th April 2008 at 12:45.
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************

Similar Threads

  1. Advice on Wiegand Buffer
    By brutc001 in forum Schematics
    Replies: 0
    Last Post: - 19th December 2009, 00:31
  2. Need "PIC16F84A" Controler schematic Advice...
    By Kyo_89 in forum Schematics
    Replies: 1
    Last Post: - 27th May 2009, 23:03
  3. Your OTP advice?
    By truvahorse in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 28th June 2008, 16:37
  4. Decoding an incoming infrared signal: need advice
    By xnihilo in forum mel PIC BASIC Pro
    Replies: 10
    Last Post: - 9th May 2008, 16:28
  5. Advice needed on 'neat' Project!
    By vacpress in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 11th February 2007, 06:21

Members who have read this thread : 0

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts