|
Hi Steve,
I agree that a temp compensated Vref source is a better solution here but would you care to explain why you think it's not a good idea to boost the signal from the sensor?
Yes, the sensor noice will be amplified too but it shouldn't be that bad. Actually, amplifying the signal or lowering Vref shouldn't make any difference, except from non linearity of the amp and possible noice added BY the amp but I don't think that would be a problem in this case.
/Henrik.
|
I guess it depend of the accuracy you need. If you use the internal Vref, when the PSU voltage swing, your accuracy will swing with accordingly right?
Assuming the supply never ever swing... yeah you may boost the sensor output... carefully designed it has to work. Not something i would test on a breadboard... i'm kinda noise freak
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
|
Yes absolutely, but if you have 20mV noice or swing on the supply rail with a sensor output of 10mV/° you have 2° worth of noice. If you boost the signal to 100mV/° the same noice on the supply rail is now "worth" 0.2° instead.I guess it depend of the accuracy you need. If you use the internal Vref, when the PSU voltage swing, your accuracy will swing with accordingly right?
PICante,
In a previous reply I sugested a Vref of 1.024V but after reading the 16F88 datasheet that may not have been a very good advice. Vref needs to be 2V minimum according to the datasheet so keep that in mind if you go for an external reference.
/Henrik.
|
Thanks guys!
Yes I like to try the external reference and I need one decimal accuracy with +- 0.5C overall. Maybe it will take a high stability voltage source to reach this.
Now I will try to figure out how to connect the Vref + & Vref- also how to set the bits in ANSEL and ADCON1 perhaps even the CVRCON? Not easy being a newbie! :-)
|
I know what you mean. But it makes for a good excuse when something does not work or the room fills with smoke!!!Originally Posted by PICante
Dave
Always wear safety glasses while programming.
|
But it's always fun once in a while to have a smoke show huh?
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
|
Then you tell the kids. "I just did that so you could see what not to do." and "Always wear your safety glasses while programming."
Dave
Always wear safety glasses while programming.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks