Jump from ISR

[skimask]

I want to use PIC16F877.
I know that micro's eeprom hasn't 1500b memory.
You know, I want to use serial eeprom for example 24c04 (4K bit)

Might not have 1500 bytes of eeprom, but I'd be willing to bet that you'd have an extra 1500 bytes of program memory left to use.

Can you help me about changes on your written program for using serial eeprom ?
I think that I should use i2cread command like below:
i2cread sda , scl , ctw , I , Value

I'd also be willing to bet that there's something about the I2CREAD command in the manual...

[yasser hassani]

Special thanks from dear friends that help me in this thread.
I use I2CREAD and it works excellent.
========
Regards

[Acetronics2]

Hi, Yasser

It's a pleasure for us too ... to know you're happy with your project !

Regards

Alain

[mister_e]

For 15K$ you can't buy a head... but a least you'll be well equipped

Proteus and ALL simulators in general = b u l l s h i t

Nothing beat a head and real parts on a board... that gives REAL results + possible layout behaviour... the real thing.

Add some test equipment, and you're in business.

Sim are for lazy people.