Originally Posted by
mbox
Hi!
Just a begginer to pic programming, I have a pic16F628A and I'm trying to find a code & schematic for this mcu to use the internal clock and recieve data from hyperterminal that will lit Led1,Led2 and Led3. Hope you can help and thanks in advance....
regards,
mbox
Welcome to the forum !
Here is the deal, offered to all newbies. Write some code and we will help you make it work. Some here may do handovers, most do not, but most are willing to share their experience and knowledge. Why no handouts, because you learn very little from them, whereas if you struggle, you learn, and before long you are helping others. So that said let's get busy with some code.<br> So for starters do this, write a program to turn on those LEDs either by changing a port status or just make a loop to flash them in sequence, it doesn't have to be pretty, or even work, but it should show you made an effort to.
Last edited by Archangel; - 9th October 2008 at 07:21.
If you do not believe in MAGIC, Consider how currency has value simply by printing it, and is then traded for real assets.
.
Gold is the money of kings, silver is the money of gentlemen, barter is the money of peasants - but debt is the money of slaves
.
There simply is no "Happy Spam" If you do it you will disappear from this forum.
Bookmarks