The last one is the only with a code snippet, but it isn't in PBP!Originally Posted by mister_e
but i will try and read all the documents, but i am not good at ADC in PBP ;-)
|
The last one is the only with a code snippet, but it isn't in PBP!
but i will try and read all the documents, but i am not good at ADC in PBP ;-)
|
TouchScreen Controller
What does this do, and would it be easier to use a touchscreen if i buy this:
http://www.mikroe.com/en/tools/touchcont/
|
It's exactly the same draver as Alain's EasyPIC 5 board.
It may help.. but i stand to tell you don't need it.
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
|
But if i don't buy that, i would need to make a circuit who are correcting the Touch Values into the 0-5V range, right?
But do you have a PBP Example, because you sounds like you know alot, as i don't!
|
Begin with the following...
http://www.picbasic.co.uk/forum/show...44&postcount=7
Then send your results to your PC or any LCD, then try to understand what happen.
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
|
Then what if i use that touchscreen controller, then i shouldn't High any ports, should i?
|
Yes, you'll still need to play with high/low, ADC conversion etc etc... hence why i told you that you don't need it.. even your new compiler haven't it built-in
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks