thermometer and humidity sms

[elektoro2009]

another sampe circuit :

http://www.imageturk.com/goster.php?res=b3dd66fdfd2f3749bdece.JPG

How can I use this software for my regulated alarm thermometer circuit.
asm software here:

http://dosyayukle.info/index.php?p=download&link=1305062103&name=pic16f876.asm

Thank you your helping.
Regards

[elektoro2009]

I maked this circuit,but complate not run.

http://www.wrankl.de/SMST4PIC/SMST4PIC.html

here asm and hex code:

http://www.wrankl.de/SMST4PIC/V6/SMST4PICV6B47.zip

[elektoro2009]

How can I unite this sample software

http://dosyayukle.info/index.php?p=download&hash=rzskbVI8qQey

with my software.Thank you.

'**************** SMS SEND SAMPLE ********************
'************************************************* *******************
SmsMesajTx : SerOut2 modem_tx,modem_baud,["AT+CMGF=1",13] ' Mesaj Formatı TXT için
Pause Bek100

SerOut2 modem_tx,modem_baud,["AT+CMGS=",34,"90532XXXXXXX",34,",145",13]

SerIn2 modem_rx,modem_baud,5000,msghata2,[wait(">")]


Pause Bek500

SmsData = "A" ' Gidecek Mesaj


For addr= 0 TO 159
SerOut2 modem_tx,modem_baud,[SmsData]
Next addr

Pause Bek500

SerOut2 modem_tx,modem_baud,[26] ' CTRL+Z

SerIn2 modem_rx,modem_baud,35000,msghata2,[wait("+CMGS")]

msghata2: SerOut2 modem_tx,modem_baud,["ATH",13]
Pause Bek500

Return
'************************************************* ***************

[elektoro2009]

How can I unite this sample software TERMONEMALRM-1.zip with my software.
Thank you.Best regards.

'**************** SMS SEND SAMPLE ********************
SmsMesajTx : SerOut2 modem_tx,modem_baud,["AT+CMGF=1",13] ' Mesaj Formatı TXT için
Pause Bek100

SerOut2 modem_tx,modem_baud,["AT+CMGS=",34,"90532XXXXXXX",34,",145",13]

SerIn2 modem_rx,modem_baud,5000,msghata2,[wait(">")]


Pause Bek500

SmsData = "A" ' Gidecek Mesaj


For addr= 0 TO 159
SerOut2 modem_tx,modem_baud,[SmsData]
Next addr

Pause Bek500

SerOut2 modem_tx,modem_baud,[26] ' CTRL+Z

SerIn2 modem_rx,modem_baud,35000,msghata2,[wait("+CMGS")]

msghata2: SerOut2 modem_tx,modem_baud,["ATH",13]
Pause Bek500

Return
'************************************************* ***************

[elektoro2009]

circuit is here.

[Ioannis]

Hi! I would suggest to select the Mobile terminal device of your choice first and study the specs and AT commands that accompany it. Most of the AT commands are common but each terminal might have its own special ones.

Also I would strongly recommend to use the UART module of the PIC's and also use bidirectional communication to check that the device has replied with OK after succesful command.

For example:

send AT+cr+lf

device replies OK+cr+lf

After you establish a good command of the device you are going to use then trie to send SMS. It is a difficult task for the begginer.

Ioannis

[elektoro2009]

Do yuo know sample temparature and humidity sms send circuit.
Could you write sample address.
I know this address: http://www.wrankl.de/SMST4PIC/SMST4PIC.html
I maked this circuit,but complate not run.Don't sms.
Thank you.Regards.