So this laquer stuff. Did i understand correctly that it works as both a protective layer and soldering flux so i could spray it over the whole board and solder ontop of it? (something like that anyway)
The SK10 to which I was refering to is NOT the same as the laqur that you might have.


Your product could probably be sourced from Maplin:
PCB Lacquer
• Fast drying acrylic coating
• Acid and alkali resistant
• Multi application
• Seals printed circuitry
• Use for over-lacquering of metal and paintwork
• Ideal as a waterproof coating for maps and technical documents
• Supplied in a 200ml can

Is this the same product it would say Maplin on it?

It is a bit of a nightmare as there are more "service aids" stuff in aerosols and bottles than one man can reasonably want or use.




The tinning I use is
Seno Immerse Tin 90g for 1ltr £11.50 from megauk, mix it yourself as it has a short useable life in weeks, It is extreamly poisonous, not really to be chucked down the drain! as with almost anything to do with PCB production these days.


Whooaa this thread is sure am moving

Duncan