Code snippet: time execution for each line: help please

[xnihilo]

Could someone be kind enough and tell me how many instruction cycles each line of this code will use because I need to know what time this routine takes to execute.
I'm using a PIC16F684 and its internal oscillator at 8MHz

databyte = %00000000

'wait for the header pulse to end and check if duration is about 2400us+/-100us
j = 0
WHILE (porta.0 == 0)
  PAUSEUS 20
  j = j + 1
WEND
IF (( j < 115) || (j > 125)) then abort    'wrong pulse duration

FOR i = 0 to 7

j = 0  
WHILE (porta.0 == 1)    'wait until the bit prefix (600us no-pulse) ends
  PAUSEUS 20
  j = j + 1
WEND
IF ((j < 25) || (j > 35)) then abort    'wrong no-pulse duration, we want it to be 600us+/-100us

j = 0
  WHILE (porta.0 == 0)
    PAUSEUS 20
    j = j + 1
  WEND
  IF ((j > 25) && (j < 35)) THEN
    databyte.0(i) = 0
    GOTO bypass
  ENDIF
  IF ((j > 55) && (j < 65)) THEN
    databyte.0(i) = 1
    GOTO bypass
  ENDIF 
GOTO abort    'wrong pulse duration
bypass:

NEXT i

abort:

[mister_e]

There's few way to measure it
a) Toggle a led between a code snip, and mesure it with a scope
b) using MPLAB stopwatch
c) using the following method
http://www.picbasic.co.uk/forum/show...72&postcount=2

and if you want to elaborate a bit more
http://www.picbasic.co.uk/forum/show...33&postcount=9

If you're using the above solution with Timer, don't forget to adjust your results with Timer ticks.