Which resonator is best

[mister_e]

Most of those 3 pins ceramic resonator i know have built-in capacitors. Those you post above don't, so you'll have to add 2 extra capacitor to make it work.

16F84(A) is popular 'cause it's the first Flash one (16C84). Many code example here and there in ASM. But you don't want to use it for a new project unless you don't have access to something else. Most newer model are also cheaper... see WAY cheaper. Good enough for a pin board

16C54 have been popular as well.. now they have 16F54

[The Master]

What do those codes actually mean? Is the first number and letter like a version number and the second number like the type?

Sorry to get back into this one again but how do i know what type of chip to use? The main reason im using a PIC16F84A is because ive used it in the past and its always worked fine. I dont like thinking that way. Im all for changing to make things better but here i dont know what to change to. You have given me a few examples but how did you know which ones do the same thing? I know the datasheets tell you but i dont believe that you sit there reading every possible datasheet to find the chip you want

I think ill stick with 3 pin ones then. I dont want any extra components taking up room/money.

[The Master]

What kind of temperatures affect them? Are we talking 1 or 2 degrees could alter it or like 20-30 degrees? Most of my stuff would remain at more or less the same kind of temperature give or take a few degrees.

[mister_e]

PIC16F84 don't do much and absolutely need an external crystal+MCLR connection.. 16F628 have comparator, MSSP, USART, no real must for external MCLR (this gives 1 i/o for free), can use it's own internal osc (that's 2 more i/o for free) and so on. More with PIC16F88, and a bit more with 18F1320. and there's still the codespace...

There's some temperature curves in the datasheet you can refer to. I still repeat, unless you need a real timing accuracy (e.g. high speed asynch serial comm), internal osc may be just fine. 16F88 one can run up to 8MHz, 18F1320 up to 32MHz!

[mackrackit]

This is the quick way to start picking PICs.
http://www.microchip.com/ParamChartS...g=en&pageId=74
http://www.microchip.com/stellent/id...PAGE&nodeId=74
And I do read many many data sheets. Not that it helps much Always fall asleep.

[The Master]

Ive seen that site before but i had trouble using it. It looks like all the information is there but searching and displaying it could be improved a bit.

In the second link (and the dropdown on the first). Should i always pick PIC16MCU? I dont get that bit and there doesnt seem to be any description of whats different between them

[mackrackit]

The 16MCU will take you to the 16C/16F chips. 18MCU will take you to the 18C/18F chips etc.