PCB low volume production

[phoenix_1]

I can offer to make you PCB but only one side with top stamp and soldermask and hole's for minimum cost + transport cost.
You can send me Protel99SE,Altium or SprinLayout 5 files or simple PDF format.
Contact me on my private email.
Cost is 6 EUR for 1dm² it is price for 1-10 pcs if you need more price go to
10-100 = 4 EUR for 1dm²
I can make PCB with minimum lines 0.3mm and pad distance minimum 0.3mm.
Top stamp can be only white and soldermask green.
If someone need let me know.
Regards Robert

[victorf57]

Try here.
http://www.futurlec.com/PCBService.shtml
I did order from them, Price was good but took a bit longer than it should have.
Victor

[dhouston]

Try here.
http://www.futurlec.com/PCBService.shtml
I did order from them, Price was good but took a bit longer than it should have.
Victor

Their prices are much higher than China. They want $267 for 25 double sided 4.25" x 3.00" boards with silkscreen and soldermask. PCBCart (China) wants $153 for the same. Reorders would be $50 less (tooling charge) from China but only half that from Futurelec. Both are quoted in $US.

[dhouston]

For those interested, I received the quote from UWELLPCB for 100 pcs. 4.250"x3.000" boards with them supplying and installing about 50 SMD capacitors/resistors/inductors (mostly 805), 2 SOIC-8, 2 SOIC-16 plus a through-hole crystal and a 40-pin DIP socket. They will cost about $22.50 each which includes fabricating the boards, buying and installing the components and air courier charges. I can reduce that more by giving them an annual order from which they will release monthly shipments.

I have a stencil for the solder paste and have been assembling these myself, inserting the components with tweezers. The last batch of four took 2 hours or 30 minutes per board. The bare boards cost me about $4 each (from PCBCart) and the components about $8 per board. Their prices seem very reasonable to me and fit within my price structure for the product.