The data sheet for the modem says that if a pin26 on the modem is pulled low with a resistor <=10K it will put the modem into autobaud mode. I assume the 2400 baud that I am sending at should be ok, am I right in this thinking?
Jim
|
The data sheet for the modem says that if a pin26 on the modem is pulled low with a resistor <=10K it will put the modem into autobaud mode. I assume the 2400 baud that I am sending at should be ok, am I right in this thinking?
Jim
Last edited by jimboho; - 5th November 2004 at 02:22.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks