Interrupt mystery - need some guru help

[xnihilo]

Hi,

I do hate war games ... ( except the film ...) BUT

FOR i = 0 to 5
    aport[i] = porta.0(i)       'mirror the pins states into the array
NEXT i

Are you really sure of those lines ... ???

Yes. You can try it.

Alain

PS

    IF dead == 1 THEN finish    'if player is already dead, don't answer and leave the int routine

Ha,ha,ha ... YOU 're dead !!!

What do you mean?

Re-PS

The PICs control transistors that drive relays for 9V supply to nichrome wires for the physical feedback. 
One cm of 38ga Nichrome wire, with 9V and a 6 ohms resistor is heated for 500ms, inducing a little burn that will leave a very tiny scar similar to cat's claw scratch.

And overall sado-maso games ...

WHAT A PITY !!!

It is a lasergame with physical feedback an recoil.

[Acetronics2]

Yes. You can try it.

>>> NO !!! Won't work ...



What do you mean?

>>> I leave your routine where it is ...


It is a lasergame with physical feedback an recoil.

>>> Sado-Maso's little chicken warrior's game : Try it with real ammunition and real ennemies , you won't be so proud ...

Alain

[xnihilo]

>>> NO !!! Won't work

How can you explain it works for me then?

>>> I leave your routine where it is ...

Again, i don't understand the meaning of this sentence.

Sado-Maso's little chicken warrior's game : Try it with real ammunition and real ennemies , you won't be so proud ...

What chicken?
It is a game meant to be a role playing game for cqb/mil-sim simulation.
Like Rainbow Six sgame series on pc.
What's your problem with that anyway?
Well that's not the point. I'm not here to discuss about RPG but about interrupts, am i not?

My idea is that the reason why i get unexpected interrupts is because i enable int for ra3 while this pin is left
floating... What is exactly the electrical/logical state of this pin (mclr disabled) when enabled as input pin with no external wpu, i don't know.

Maybe some smartass on this forum knows that