the ultrasonic SRF04 with pic16f88

Closed Thread
Results 1 to 16 of 16

Hybrid View

  1. - 17th March 2008, 03:33 #1
    mackrackit's Avatar
    mackrackit
    mackrackit is offline SuperMod
    Join Date
    Nov 2003
    Location
    Wellton, U.S.A.
    Posts
    5,924

    Did you find this post helpful? Yes | No

    Default

    Have you seen this?
    http://www.picbasic.co.uk/forum/showthread.php?t=561
    Dave
    Always wear safety glasses while programming.
  2. - 17th March 2008, 05:49 #2
    tur_bot's Avatar
    tur_bot
    tur_bot is offline Junior Member
    Join Date
    Mar 2008
    Location
    london
    Posts
    15

    Did you find this post helpful? Yes | No

    Talking thank you so much

    thank you so much. you are a star
    finally everything is working with internal clock and measurements well displayed on the lcd.

    wasn't that easy to understand the data sheet but because of all of you guys, with all your examples and suggestions , i managed to find the right settings.

    again thank you guys
    God bless you all
  3. - 17th March 2008, 16:17 #3
    skimask's Avatar
    skimask Guest

    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by tur_bot View Post
    wasn't that easy to understand the data sheet but because of all of you guys, with all your examples and suggestions , i managed to find the right settings.
    Just curious...which bit fixed the problem?
    Invariably, it's usually that one little bit that fixes everything...
  4. - 20th March 2008, 17:20 #4
    tur_bot's Avatar
    tur_bot
    tur_bot is offline Junior Member
    Join Date
    Mar 2008
    Location
    london
    Posts
    15

    Did you find this post helpful? Yes | No

    Default which bit fixed the problem

    Quote Originally Posted by skimask View Post
    Just curious...which bit fixed the problem?
    Invariably, it's usually that one little bit that fixes everything...
    those 6 lines allowed me to use an accurate inside clock and to use all pins as digital input or outputs:

    DEFINE OSC 4
    INTRC_OSC_NOCLKOUT
    INTRC_IO
    OSCCON=%01101000
    ANSEL=%00000000 'this comand disable all adc
    CMCON=%00000111 'this bit disable all comparators


    the two last commands fixed the problem to get just digital inpout and outpout on all 15 pins available, and disabled all adc and comparators.
  5. - 20th March 2008, 17:24 #5
    skimask's Avatar
    skimask Guest

    Did you find this post helpful? Yes | No

    Default

    Quote Originally Posted by tur_bot View Post
    the two last commands fixed the problem to get just digital inpout and outpout on all 15 pins available, and disabled all adc and comparators.
    Just like posts #2, #4, #8, #10 said it would...
« Previous Thread | Next Thread »

Similar Threads

  1. RX TX modules - intermitent communication
    By ruijc in forum mel PIC BASIC Pro
    Replies: 13
    Last Post: - 11th June 2009, 00:13
  2. Erratic behavior with a PIC16F88 and an custom LCD Board
    By russman613 in forum Schematics
    Replies: 8
    Last Post: - 7th December 2006, 15:42
  3. PIC16F88 problem with TOGGLE command?
    By russman613 in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 17th September 2006, 23:31
  4. sensor ultrasonic 8051&PIC
    By hd_uni_pro in forum Schematics
    Replies: 1
    Last Post: - 13th September 2006, 12:58
  5. SRF04 Range Finder 16F628 R18iXL Board
    By Spindle in forum mel PIC BASIC Pro
    Replies: 0
    Last Post: - 20th June 2005, 02:08

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules