LCD serial

[Ron Marcus]

So there is a baud rate speed mismatch between the PIC and the LCD. What oscillator speed/config are you using?

[chip_select]

Or INTOSC or Crystal 4Mhz whit 2 capacitor 22pF.

[chip_select]

Or INTOSC or Crystal 4Mhz whit 2 capacitor 22pF.
T9600 baud

[mackrackit]

What chip?
Can you post your whole code?
And post how your fuses are set. Either from the *.inc or in code or if you are using one of those programs that does it for you.