DT Instant Interrupt counting

[Archangel]

ERROR: Variable wsave3 position request 416 beyond RAM_END 367.



Can someone help, please? Thank you!

I will try, not every chip has that address available. Open Darrels code and insert a semicolon just before the call to WSAVE3, he gives you instructions in the comments above that.

[jderson]

Thanks Joe. I commented out the offending line, and also the "T" line in the "Reenter" program. It now tries to assemble, but comes back saying "unknown processor 16f689". I removed the line at the top of my program about the WDT, but it still does the same thing. How does it know I'm using a 16f689?

[Archangel]

Thanks Joe. I commented out the offending line, and also the "T" line in the "Reenter" program. It now tries to assemble, but comes back saying "unknown processor 16f689". I removed the line at the top of my program about the WDT, but it still does the same thing. How does it know I'm using a 16f689?

Because you selected that processor in Microcode Studio, up at the top. When it compiles it includes the appropriate files for that processor. Oh and this too @ DEVICE pic16f689,wdt_off,
Note: you must use the MPASM assembler with Darrel's includes.

[jderson]

I removed the @DEVICE line, and I have MPASM enabled. It is MPASM that is generating the errors. I think the problem has to do with where all of the various components are located, relative to one another. (MPASM can't find the P16F689.INC file) I'm still reading.

[Archangel]

Try this for your config statement:
@__CONFIG _HS_OSC & _WDT_OFF & _PWRTE_ON & _LVP_OFF & _BODEN_OFF

[jderson]

Thanks for trying Joe, but that didn't do it. I think there's something fundamentally wrong, as the compiler doesn't know about 16f689.

[Archangel]

Thanks for trying Joe, but that didn't do it. I think there's something fundamentally wrong, as the compiler doesn't know about 16f689.

I don.t know what version you are using, look into your PBP directory and see if you have a file16F689.inc, also see if the code compiles with a similar chip. OK here is the data sheet:http://ww1.microchip.com/downloads/e...Doc/41262B.pdf