Communicate with PC at baud rate :115200 bps

[precision]

Well, that'll work too, because you're using the HARDWARE USART.
The note at the back of the book is for SERIN(2)/SEROUT(2).
The O/P didn't specify if hardware or software serial was being used...

You 'r right skimask,
We cannot achive 115200 baud with SERIN2, According to manual and limitation of compiler,
But i think one day we all will use SERIN2 at 115200 baud as below,

DEFINE OSC 20
INCLUDE "My_Lcd.bas"
INCLUDE "DT_INTS-14.bas"
INCLUDE "LCDbar_INC.bas"
INCLUDE "DT_INS-SERIN2.bas"


B0 var word
Main:
@ DT_SERIN2 , 115200, [B0]

LCDOUT $fe,1, "Value", DEC 5 B0
pause 200
goto main

Sory Sir Darrel Taylor, its impossible for us to achive 115200 baud in serin2 mode without your MAGIC code.