Hi,
How much current is drawn by your board when the mosfet is not activated?
Are you using the brown-out detection of the microcontroller?
Best regards,
Luciano
Hi,
How much current is drawn by your board when the mosfet is not activated?
Are you using the brown-out detection of the microcontroller?
Best regards,
Luciano
Luciano
I have not measured it, but it is very little current.
I am not using the brown out detection.
Hi,
Build a prototype and try it out.
Enable the brown-out detection.
Best regards,
Luciano
If you are still having trouble ty adding a choke in series with the incomming supply as well as capacitor on input and output of reg. Cars can be so noisey!
Bookmarks