Where are all the FAQ's?

[dksingh12]

Hallo friends,

Can you pls help me on my below problem, one more thing how I can post in new threads in forum.

I want to use three nos. thumbwheel switches through keypad matrics. I'm able to read all switches values. but the problem is, I want to out 12 bit o/p by increasing the o/p value one bit one by one & the total nos. of o/p bit should be equal to thumbwheel switch value within 60 seconds. means if the value is 1 then after one min. it should be +1, if the value is 10 then it should be +10 but the time interval should also be same maens it should be 6 sec.

Regards

D.K.Singh

[skimask]

Can you pls help me on my below problem, one more thing how I can post in new threads in forum.

Look at the top of the page...

I want to use three nos. thumbwheel switches through keypad matrics......also be same maens it should be 6 sec.

Anybody else get this?

[nomad]

should be how to access all the faq's!