auto advance

Closed Thread
Results 1 to 7 of 7

Thread: auto advance

Hybrid View

  1. - 31st October 2004, 11:10 #1
    c_Moore's Avatar
    c_Moore Guest

    Did you find this post helpful? Yes | No

    Default auto advance

    Hi Mister E thanks for the reply.What I want to so is I have a hall sensor to sense input pulses.I set the static timint at 30 dgrees.What I need the PIC to do is at start up and idle delay enough to make the sparkplug fire at 4 degrees. as the RPM increases reduce the delay in proportion to the RPM until 7500 and above.Then have no dalay .To make the plug fire at all It takes a low pulse. Thanks for the help.Have a great day


    BTW: the engine this setup is on is a converted weedwacker I converted it to a model airplane engine.
    Last edited by c_Moore; - 31st October 2004 at 13:09.
« Previous Thread | Next Thread »

Similar Threads

  1. How powering PIC in auto ?
    By fratello in forum Schematics
    Replies: 19
    Last Post: - 19th October 2009, 07:35
  2. auto recloser ELCB
    By badbaik in forum mel PIC BASIC
    Replies: 5
    Last Post: - 5th February 2009, 13:54
  3. AUTO baud rate detection FOR UART connection to PC
    By mike20200 in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 3rd September 2007, 00:56
  4. Auto Baud Rate Detection
    By mytekcontrols in forum Serial
    Replies: 10
    Last Post: - 31st October 2005, 02:17
  5. Modem Auto Answer-Hanging for 1 min...
    By Ioannis in forum mel PIC BASIC Pro
    Replies: 21
    Last Post: - 22nd August 2005, 09:38

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules