RYTECH,
Do you need the solar panels ONLY for charging?
I did not get it clear enough with the posts above.
---------------
|
RYTECH,
Do you need the solar panels ONLY for charging?
I did not get it clear enough with the posts above.
---------------
"If the Earth were a single state, Istanbul would be its capital." Napoleon Bonaparte
|
Hi people... sorry for the delayed response, i've gotten somewhat sidetracked designing a perpetual motion machine...lol...
as for the power system.. I would like it to a) recharge the batteries and b) supply the load with any additional unused power from various input sources...
|
Re: 18F4550 Solar battery charger / regulator & inverter system
NEWARK and MOUSER sell the PB137 it is a 13.7V version of the 7815.
13.7V is the perfect voltage for Sealed Batteries, you NEVER EVER WANT TO OVER CHARGE THEM 14.1V is the absolute max.
GEL CELLS will never heal from overcharging, the bubbles form and push the mat away from the plate, the bubbles do not dissolve or move.
I like your idea, you could measure the amount of current flowing IN to the batteries if they are not receiving then you can by pass shunt off the excess.
On ebay many folks are sellling dc-dc converters, you can use these to stabilize the power from the panels
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks