multiple ADC using DSpic 30f3010

[skimask]

Sorry I forgot to mention ... I am using MPLAB IDE to compile this and ICD 2 as the connector to program my dsPIC ...

Still doesn't look like that'll compile under MeLabs PicBasic or MeLabs PicBasicPro, which only support PIC12, PIC14, PIC16, PIC18xxxx devices.

[paul borgmeier]

>>I am trying to convert two analogue signal using pin AN2 and AN3 by the dspic30f3010

Hi Angeline,

What Ski is trying to tell you is that we mostly discuss code written in BASIC in this forum. You might want to try here
http://forum.microchip.com/
for help with your C code.

Best of Luck,

[skimask]

What Ski is trying to tell you is that we mostly discuss code written in BASIC in this forum. You might want to try here
http://forum.microchip.com/
for help with your C code.
Best of Luck,

You'd figure some folks could figure that bit out all by themselves...

[angeline]

>>I am trying to convert two analogue signal using pin AN2 and AN3 by the dspic30f3010

Hi Angeline,

What Ski is trying to tell you is that we mostly discuss code written in BASIC in this forum. You might want to try here
http://forum.microchip.com/
for help with your C code.

Best of Luck,

Oh, now I understand . This is my first time posting . By the way, thanks =)