pic16f84 with pickit2

[mvs_sarma]

Zk_bamx2,
you need winXP, .net &MPLAB8 and its associated package pblished on MIcrochip.com
You have to install the pickit2 2.4 driver .
After plugging in the PICKIT2, run the pickit2 software-- select midrange devices, select 16f84A and then load the HEX file.
make a small cable to plug into the ICSP socket - pins are described by them
connect the other end to the relevant pins of the f84A..
It should be possible to program Sir.

[zk_bamx2]

thanks to all who helped me with this minor problem. the pic16f84a is now working fine. made my own picboard. i can now program the ic with the pickit 2.

thanks again