Nokia COLOR LCD PicBasicPro 2.50a example code

[srspinho]

Hello Dave,

sorry for my alte response (I had a small car accident yesterday).

Thank you very much for your response. If you want, you can send it to [email protected]

I think gmail can handle big atached files !

Don't worry about the Code comments

First, I will try everything without USB connection. After that I will try to implement everything together !

Thank you again !

regards.

Sérgio

[DaveC3]

Sérgio

Did you get the files I sent you?

Thanks

Dave

[srspinho]

Hi Dave,

Thak you for your reply.

Yes, I receive your e-mail on my gmail account, but, the files were received by gmail as plain text... strange... is the zip files bigger than 2 Mbytes each ?

regards.

Sérgio

[DaveC3]

Sérgio

I took out some of the supporting files, here is the VB6 code and the PBP files. Again, I am using the microchip USB Boot-loader, EasyHid so you will need to load the drivers for these programs. I also use a BMP to HEX editor to produce the color Images on the display. I send them via USB 64 bytes at a time so the picture loads fairly fast.

Good luck

Dave

[mister_e]

Out of curiosity, which BMP to HEX software are you using?

[skimask]

Sounds like the beginnings of one of those mini- LCD picture viewer things...

[srspinho]

Hi Dave,

thank you very much for these files !

Well, last weekend I changed your first code removing the USB stuf and the picture download.

It worked very well !

I bought 1 LCD and 2 breakout boards from SparkFun. One of the boards are not working (the LCD keep the backlight lit and nothing happens). Checked the connector and discovered that 2 connector´s legs are short circuited.

So, the LCD was installed in the another board and everything worked fine.
My board is running with a 20 Mhz crystal, but I think it is a bit slow. So, I will change it to full speed and check if it gets better.

Well, I will check your new files and see what I will need to change here !

Tahnk you Again !

PS. Did some one here successful on buying some Lib from ComSys1 ? I have been trying to contact them to buy the KS0108 Graphic lib but they never answer the e-mails!

Regards