Roman Black Sound (btc)

[Acetronics2]

Hi, Leetzeyin

Why not ask it directly here :

http://www.mikroe.com/forum/viewforu...4d9546d98f2797

I think they already dealt with this encoding system ...

Alain

[skimask]

Hi, Leetzeyin
Why not ask it directly here :
Alain

Didn't you get the memo?
Apparently, PicBasicPro = mikroC = Proton Basic = mikroBasic = Assembly = Everything else...

[sirvo]

How do I download the .btc or .asm or .c file to the eeprom?

Thanks..!

[Darrel Taylor]

I did some experimenting with storing the sound in external EEPROM.
And for sure, you have to be using the MSSP module to read the data.
SHIFTIN or I2CREAD can't keep up with the higher bitrates.

I tried contacting Roman several times by email, and never got an answer, so I kind of forgot about it, and haven't done anymore with it.
<br>

[sirvo]

I recorded a 5 sec 8-bit mono 22050Hz sound... then I stored it in the 24C512..

then I put this on the 16F877:

LOOP:   
      I2CREAD DPIN,CPIN,$A0,B0,[ATUAL, PROX] ' Read 2 locations in a row
      B0 = 2
      REPEAT
        while F_nova = 0 : wend
            f_nova = 0
            I2CREAD DPIN,CPIN,$A0,B0,[PROX]
            b0 = b0 + 1
      'UNTIL B0 = 4997
goto loop 
  
disable
PPL:    PIR1.0 = 0 
        TMR1H = LOAD.HIGHBYTE
        TMR1L = LOAD.LOWBYTE
        BUFFER.6 = ATUAL.7
        PORTD.1 = BUFFER.6
        PORTD.0 = BUFFER.7
        BUFFER = BUFFER << 1
        ATUAL = ATUAL << 1
        f_ctrl = F_Ctrl + 1
        if F_ctrl = 8 then
            F_NOVA = 1  
            f_ctrl = 0
            atual = prox
        endif
RETURN
ENABLE

Well, what I get is a slow and noise sound of what I had recorded. It is recognizable but isn't that good..

I've tried increasing TMR1 interrupt but it did not make a difference...

So, next steps:

I'll try to user asm interrupts (instant interrupt..DT)
try not to use I2CREAD..(editing: So, i've got to use MSSP..... Well, I suspect that there is no @ HI2CREAD yet, right? )

Well, that is all..

danke schön..

[Ioannis]

Darrel, have a look at the attached files. It might help on the audio compression project.

Please rename the files to *.rar and then de-compress them.

Ioannis

[Darrel Taylor]

Hi Ioannis,

What are they?

Roman's btc convertor creates the smallest sound files I've ever seen.
Can't imagine more compression being able to do anything without ruining the sound.

I don't use RAR.
Not brave enough to download free programs from a couple of brothers in Russia.
<br>