Darrel,
I was reading your article on Wiki and decided to test it. I have a proto hardwares done (18F452 + 4MHZ cristal) and I would like very much to use this tool with my circuits. Firstlly I want to understand better some things.
I tested using RB_Sound Folder files (TestRBSound.pbp, DT_RBSound.pbp and the asm files like HitNew.asm, FascinatingNew.asm...)
in the TestRBSound.pbp is assigned:
btc_Pin1 - PORTC.2
btc_Pin2 - PORTC.3
LATE_LED - PORTC.5
well, I wired a led to the PortC.5. It is done
What I need to do with btc_Pin1 and btc_Pin2. How to wire and where?
...others files (Number folder) into the .asm files has a draw:
Digital label + resistor R = 25968 ohms and a 0.22uF capacitor to the ground and Analogue label on junction. Need I to put a speeker here or a buzzer? Or is necessary to use a pre-amplifier? Do you used the BTc.exe (BTC Sound Encoder from Roman Black)? I teste it using a Ding.wav from windows and exported to a ding.asm, but into the files is diferent comparing with your files...Into the one.asm for example you coment "File converted to .BSM format with the freeware btc_convertor by Darrel Taylos...Is it other converter diferent of the BTC Soundd Encoder?

Well...
Then I decided to wire a 26k resistor to portc.2 and a 0.22uF capacitor like the draw, and puted a buzzer on junction only to test. The portC.3 NC.
I compiled with sucess but it don't worked!
The led blink just one time and nothing occur.
I don't know what I need to use, if a buzzer, a speeker, a amplifier, how to wire it with certainly but the led should to blink basead on program!
Then I alterate the program to blink 5 times, and then the led blinked 5 times but after it stoped again...I percever the after @ PlaySound BigGun line, nothing occur (led always low, buzzer low)
If you can help me to use it I would be very happy.
I really apreciate it and woul like to use in my projects