Quote Originally Posted by Fredrick View Post
My solution will be to pull down PDN line when i donīt want to transmitt and pull it high when i want to transmitt or just drive the hole modul from an +5v high PIN on the PIC that is active when i want to transmitt and then pull it low.

Transmitter supply current is 5.2 mA so a pin from the 16F628A that have 20mA is enought.

Then i can use True mode whitout have an RF carrier when i donīt send.
Quote Originally Posted by Fredrick View Post
The maximun output power for the transmitter is 14DBm or 25.11mW
Is that correct?

http://www.linxtechnologies.com/Docu...Data_Guide.pdf
The datasheet that you just posted...page 2, lower left corner, ABSOLUTE MAXIMUM RATINGS...might have something to do with something...