Thanks I've commented the Picbasic fuses in the include...

Fuses is ok but on compiling this code:

Code:
ASM
    CONFIG FOSC=HS    ; Use HS oscillator (20MHZ here)
    CONFIG BOR=OFF    ; Brown out reset ON  
    CONFIG WDT=ON    ; Watch dog timer ON
    CONFIG LVP=OFF   ; Low Voltage programming OFF
    CONFIG DEBUG=OFF ; Background debugger OFF
    ENDASM
led VAR PORTB.5
steps VAR WORD
cycles CON 2

' Change limits for steps to play around 0 or 100% brightness
' Change steps for different duration of ramps
' Works good even with high brightness LEDs, harder to control linearly


fade:

up:
For steps=0 TO 255
PWM led,steps,cycles
Next
High led

Pause 2500

down:
For steps=255 TO 1 STEP -1
PWM led,steps,cycles
Next
Low led

Pause 2500


GoTo fade

End
i receive many errors :


maybe it's the code that is faulty or it's something else ?

Could you show me a code that will ABSOLUTELY compile (and tested to work), ex: blink a led so i can start to debug the previous code , to see if its my compile that freaks out or it just a simple issue....


Many thanks!

Have a nice week!

Best Regards,

Laurent