Hserin and Timer0

[Pesticida]

Ok

I found on the PBP book the Answer ,but not the solution.

Where Can I found a good Assembler Interrupt example ?

regards Pesti

[duncan303]

Where Can I found a good Assembler Interrupt example ?

you could take a look at Darrel Taylors instant interrupts routines, http://darreltaylor.com/DT_INTS-18/home.html
if you are using 18F's
They have made interrupts so much easier, especially for me.

HTH

Duncan

[Pesticida]

Hi

I have try Darrels Instant Interrups ,but all the time show the Error 108.

Warning[207] C:\PICHEX\USBWIZ.ASM 1849 : Found label after column 1. (warning)
Error[108] C:\PICHEX\USBWIZ.ASM 1849 : Illegal character (")


I can not found the Errors!

Rgards Pesti

[skimask]

Hi
I have try Darrels Instant Interrups ,but all the time show the Error 108.
Warning[207] C:\PICHEX\USBWIZ.ASM 1849 : Found label after column 1. (warning)
Error[108] C:\PICHEX\USBWIZ.ASM 1849 : Illegal character (")
I can not found the Errors!
Rgards Pesti

Do you have an extra ' <- yes, that character right there, the little extra tick
in between a couple of quotation marks. They hide very well. Or maybe an extra quote mark somewhere?

[Archangel]

Hi Pesti,
I get errors like those if I have spaces where they do not belong, I am sure you are using MPASM 'cause I think you have to for 18F parts, but Darrel's Instant Interrupts also require them. One more thing is Darrel has different DT_Instant interrupts for 16f and 18F series.
JS

[Pesticida]

Hi

Thank you ,Yes I must take a look .
I found another way to use Interrupts.

I use just little pause intervals,my problem was that I use Debugin,Hserin Interrupt and the Timer0 Interrupt.

Now is OK but I think that i will learn another Programming Language while PBP dont work very good with interrupts,I need for my Company something efficient.

Regards Pesti

[skimask]

Now is OK but I think that i will learn another Programming Language while PBP dont work very good with interrupts,I need for my Company something efficient.
Regards Pesti

PBP works great with interrupts, at least as well as anything else you'll find out there.
Yes, DT_INT's work better than ON INTERRUPT, but only because they work in a different way. I've used DT_INT's, I like them, outstanding piece of software to add to a program...But...I still use ON INTERRUPT only because I know how to handle it and to keep it out of my way.

It's all about the keyboard and who is banging on it to define whether or not the program you are writing is responding to those interrupts as you want.
I think I can say with a high degree of confidence that you won't be able to change compilers/assemblers and magically get good interrupt performance without first improving programming skills.

[Archangel]

Hi

Thank you ,Yes I must take a look .
I found another way to use Interrupts.

I use just little pause intervals,my problem was that I use Debugin,Hserin Interrupt and the Timer0 Interrupt.

Now is OK but I think that i will learn another Programming Language while PBP dont work very good with interrupts,I need for my Company something efficient.

Regards Pesti

Look Pesti,
You have 2 1/2 years invested into your learning experience here, how inefficient is starting over going to be? What you learn here translates pretty nicely into C, Assembly, and others.
Stay the course, learn how to do it here and the learning curve will be considerably shorter later, interrupts are one place you could invest the time, learn how to put assembly interrupts into your PBP program, and kill 2 birds with a single stone.
JS