Another DS18B20 problem

[ruijc]

Thanks all,

Alain, is this what you mean?

digital:

owout digitalin,1,[$CC,$44] 'TELL SENSOR TO START A TEMPERATURE CONVERSION

Wait_Up:
OWIN digitalin,4,[Busy] ' Read busy-bit
IF Busy = 0 THEN Wait_Up ' Still busy..?, Wait_Up..!

OWOUT digitalin,1,[$CC,$BE] 'TELL SENSOR YOU WANT TO READ THE TEMPERATURE
OWIN digitalin,0,[STR DQ\9] 'RECEIVE TEMPERATURE FROM SENSOR

.

[ruijc]

I just tested the change but the result is the same

I've placed a led and added a : toggle led1 right at the beggining of the label digital.

I can see that if i remove the sensor's data conection the led freezes, so it means that the waiting lines are doing their job.

However i'm still stuck with the same values on my lcd

.

[Acetronics2]

As the title says ... make a little SEARCH on this forum and you'll find tons of WORKING examples about DS 1820 and 18B20 or 18S20 ...

Then just "cut and paste" ... instead of trying to re-invent the wheel !!!

Alain

[ruijc]

Thanks Alain,

But that's what i did in the first place...that's how i found CocaColaKid's example... and it didnt helped me much

.

[skimask]

But that's what i did in the first place...that's how i found CocaColaKid's example... and it didnt helped me much

Hate to say it, but it must be a hardware or keyboard problem.