Ok. To make it clear I want This:

http://www.sportdevices.com/ignition/ignition.htm

but want to do that myself AND by using Picbasic Pro (Full version 2.5). I donīt want to write Asm because Iīm unable to do so.
Although I know this could be done with 1 simple PIC Iīm willing to take 2 of them or 3 if necessary for Picbasic Pros sake.

Those smart Guys that programmed ignitions donīt even give you the ASM code, only Hex.

Further I need this circuit and software etc. modified for different engines . For that I bought the PBP software.

I know You Guys could programm something like I need in 5 minutes or less but I need something in simple structure so I can handle the software and necessary changes.

My actual problem is the fact that my serial pic to pic communication is far to slow AND the com routine seems to delay the interrupt action by about 1ms which is inacceptable.

Hope this made everything clear.

thanks for your interest.