Originally Posted by
BobK
As for the time machine idea, I think you will need a bigger PIC or maybe many PICs with an RS485 link between them all.
BobK
The new PICs coming on line have a QFI (Quantum Foam Interface) module for instantaneous submolecular state transposition, as well as employing a MPTE (Multi Phase Turbo Enacabulator)...see below...
Code:
Engineers last week were avidly reading a pamphlet published by
Arthur D. Little, Inc., a venerable Cambridge, Mass, chemical and
engineering research firm. Title: The Turbo-Encabulator in Industry.
Excerpts: " ... Work has been proceeding in order to bring perfection
to the crudely conceived idea of a machine that would not only supply
inverse reactive current for use in unilateral phase detractors, but
would also be capable of automatically synchronizing cardinal
grammeters. Such a machine is the 'Turbo-Encabulator'. "The original
machine had a base-plate of prefabulated amulite, surmounted by a
malleable logarithmic casing in such a way that the two spurving
bearings were in a direct line with the pentametric fan. ... The main
winding was of the normal lotus-o-delta type placed in panendermic
semi-boloid slots in the stator, every seventh conductor being
connected by a nonreversible trem'e pipe to the differential
girdlespring on the 'up' end of the grammeters. "Forty-one manestically
spaced grouting brushes were arranged to feed into the rotor slipstream
a mixture of high S-value phenylhydrobenzamine and 5% reminative
tetryliodohexamine. Both of these liquids have specific pericosities
given by P = 2.5C.n^6-7 where n is the diathetical evolute of
retrograde temperature phase disposition and C is Cholmondeley's
annular grillage coefficient. Initially, n was measured with the aid of a
metapolar refractive pilfrometer . . . but up to the present date nothing
has been found to equal the transcendental hopper dadoscope. ...
"Undoubtedly, the turbo-encabulator has now reached a very high level
of technical development. It has been successfully used for operating
nofer trunnions. In addition, whenever a barescent skor motion is
required, it may be employed in conjunction with a drawn reciprocating
dingle arm to reduce sinusoidal depleneration."
Need I say more?
Bookmarks