TMR0 stops working

Results 1 to 26 of 26

Threaded View

  1. - 17th June 2008, 17:10 #16
    shahidali55's Avatar
    shahidali55
    shahidali55 is offline Member
    Join Date
    Jun 2006
    Location
    Bangalore, India
    Posts
    136

    Did you find this post helpful? Yes | No

    Default

    Hello Darrel,
    As you suggested in post 2, the battery now charges from output from the 5v regulator (through a diode and a 2.2k resistor). The voltage at the PIC never rises above 4.6v. I tested this system with a 20v DC supply and the voltage at the pic pins is still at 4.63 volts (after 48 hours of running).

    I have attached a copy of the file with the required include (Instant interrupts) as a zip archive.
    The pushbuttons are not a concern now since the primary function of the device itself
    (i.e. keeping time) is not met.

    Is ASM opcodes in column 1 bad ?
    Attached Files Attached Files
« Previous Thread | Next Thread »

Similar Threads

  1. COUNT is not counting again
    By jellis00 in forum mel PIC BASIC Pro
    Replies: 33
    Last Post: - 19th June 2009, 04:52
  2. TMR0 interrupt and HSERIN
    By boban in forum mel PIC BASIC Pro
    Replies: 2
    Last Post: - 2nd September 2008, 11:48
  3. help: TMR0 interrupts disabling PORTAchange interrupts???
    By xnihilo in forum mel PIC BASIC Pro
    Replies: 4
    Last Post: - 19th August 2008, 15:10
  4. using TMR0 as a counter..
    By sirvo in forum mel PIC BASIC Pro
    Replies: 1
    Last Post: - 28th July 2007, 02:56
  5. Strange behaviour from PIC16F877 on TMR0
    By mikebar in forum mel PIC BASIC Pro
    Replies: 18
    Last Post: - 19th August 2006, 01:31

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules