Who can help me checking my Programming

[skimask]

HELLO...skimask.....i want to ask u some thing....your post 2 the programme i can use it...if i want the temperature reach to 60oC and on alarm so wat the comment should i wirte it...the comment is like if portc.6=60oC then portd =1 rite or not.............if cant can u write down and example for me see it....
thanks u so much

Sure...I'll be right over there to write the code for you.
I'll even bring my whole setup...PC, keyboard, mouse, all my books...heck, I'll even bring over working hardware and donate it ALL to you...
Just for you...
I'll even bring the beer and some refreshments and a couple of DVDs, a big screen TV and a surround sound system to help pass the time...

[slimpeng]

hello....skimask........no need say like that ok......if i can done well at picbaisc pro i no need come here to ask u ad....so this is my last question ad...so help me last time ok pls....
at post 12.....i really duno i try many time ad still cant working....

i want the temperature reach to high oC around 60 to 100oC will go to on the alarm at port D after lcd will show out temperature is too Hot.....that all....

hope skimask can help me....pls.............i really duno......pls............

[skimask]

hello....skimask........no need say like that ok......if i can done well at picbaisc pro i no need come here to ask u ad....so this is my last question ad...so help me last time ok pls....
at post 12.....i really duno i try many time ad still cant working....

i want the temperature reach to high oC around 60 to 100oC will go to on the alarm at port D after lcd will show out temperature is too Hot.....that all....

hope skimask can help me....pls.............i really duno......pls............

I'll be right over...
Super swell good and dandy fine ok then?

[slimpeng]

hello skimask....sorry to disturb u again....my last part progrme on the alarm u help me write over ad mah..........i very urgent need that part if i not i will die.....it and help me......pls...help ppl god also will protect u and give u every day good luck for u.......thannks u very much......!!!!!

[skimask]

i very urgent need that part if i not i will die

A cry for help?

help ppl god also will protect u and give u every day good luck for u

What?

[slimpeng]

Hello....i Really Want To Cry Ad....i Hope Some One Can Help...it Only The Last One Commnet.......for My Temperature.........help//help///help///!!!!

[slimpeng]

HELLO skimask your post 2 source code...i can use in the my hardware part now i facing the problme is the temperature sensor no stable...i using the voltage divide rule to give the input on port A.0 rite...and when i start running the temperature will going to high to 255oC and why no stable same time i not use the sensor to burn on fire the value will automative increase or decrease and now i knw how to on the alarm on the portd ad...i try whole night and get the result ad....thanks....and who can let me kwn why the temperature sensor on this source code cant working stable and who can give me ideal or commnet....!

thanks....!