PBP 2.50 UPGRADE problems!!!!

[Rob]

Hi,

just to add to this in case this helps someone else if they experience the same problem.

I had a fair few of the same LCDs all running the same code. After a couple of hours, some of the LCDs would be blank (showing no text at all). Defining the LCD_COMMANDUS back to 2000 and also the LCD_DATAUS back to 50 solved the problem.

I didn't used to have this problem when using PBP 2.47 only since I upgraded to 2.50 - that'll teach me to always use Defines instead of relying on the library defaults!

Maybe no-one else will have this problem, maybe some will. Just thought I'd share!

Cheers

Rob

[Dave]

Rob, Also make sure you download the latest patch for 2.50 from the web site. I had a problem with the LOOKUP2 statement and that fixed it....

Dave Purola,
N8NTA

[Rob]

Rob, Also make sure you download the latest patch for 2.50 from the web site. I had a problem with the LOOKUP2 statement and that fixed it....

Dave Purola,
N8NTA

Will do - thanks very much!