Lowest readable input voltage?


Closed Thread
Results 1 to 2 of 2
  1. #1
    Join Date
    Nov 2004
    Location
    Calabasas, CA
    Posts
    84

    Default Lowest readable input voltage?

    I forgot what the lowest input voltage can be for the charging caps in a 16F716 to count using the PULSIN command?

    Thanks
    James

  2. #2


    Did you find this post helpful? Yes | No

    Default TTL, ST or analog?

    To be seen for the PULSIN command, the signal will need to exceed the input threshold voltage for that pin. This will be approx 2/3 Vcc for a Shmidt trigger input, 1.2 volts for a TTL input and for analog you can set your own limits.


    HTH
    Brian

Similar Threads

  1. Temp readings and voltage input
    By ruijc in forum mel PIC BASIC Pro
    Replies: 20
    Last Post: - 7th July 2008, 12:35
  2. Timing input pulses and re-outputting them
    By jamie_s in forum mel PIC BASIC Pro
    Replies: 5
    Last Post: - 28th February 2007, 01:50
  3. Using LEDs as light sensors
    By skimask in forum Code Examples
    Replies: 3
    Last Post: - 30th December 2006, 22:19
  4. Help with final project
    By OvERKiLL in forum General
    Replies: 4
    Last Post: - 15th December 2006, 20:35
  5. measuring input voltage
    By thon in forum mel PIC BASIC Pro
    Replies: 9
    Last Post: - 11th August 2004, 16:03

Members who have read this thread : 0

You do not have permission to view the list of names.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts