Help with LCD commands with button I/P

[mister_e]

Yes i know... look how your program flow...

it goes to Disp1 or Disp2.. then it return to Loop... knowing that SW1 can't something else than 0 or 1.. it will never execute the IF SW4 = lines.

I would suggest to use GOSUB and RETURN for a quick fix.. and be careful with LCDOUT $FE,1 line in DISP3 & DISP4 routines...

Still possible to use another method...

[g7jiq]

Thanks I will give it a try,

[mister_e]

you could still use something like..

Loop:
        IF SW0=0 THEN
                '  Paste your Disp1 stuff here
                ELSE
                                ' paste your Disp2 Stuff here
                ENDIF

        IF SW4 = 0 then
                ' Pate your DISP3 stuff here
                ELSE
                                ' paste your DISP4 stuff here
                ENDIF

        GOTO Loop

[g7jiq]

Sorted.

I just inserted a cupple of goto's and returns and It works fine on both lines now,

Many thanks for you and all for your help and advice,

Just one last thing, do you know of where I can get a list of lcdout $ commands as I would like to insert extra info togged by unused i/p's


Thanks
Dave...

[mackrackit]

The PBP manual has some. What are you looking for exactly?

[g7jiq]

I am looking for the lcdout commands, so I am able to send text to any position on a two line display,
Say, 1 command at the beginning of line 1 and another at the end of line 1

cheers
Dave..

[mackrackit]

Thats easy. Look in the manual for full explanation.

LCDOUT $FE, 80 ' First position of line one
LCDOUT $FE, 80 + 4 ' Move over 4 places to the right

Same works for the second line where $C0 is the first position.

[g7jiq]

Hi,

Thanks,
Just what I was looking for,
I can't find my manual so it was just as easy to ask.

Cheers
Dave..