Pic reset and following lock up problem

Results 1 to 20 of 20

Threaded View

  1. - 3rd February 2008, 09:04 #10
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653

    Did you find this post helpful? Yes | No

    Default

    Hi, Zeros

    << When I touch one of the crystal pins with a needle probe Pic locks up and when I remove the probe it starts working again >>

    This is absolutely normal ...,

    I think you should add a 10µF Tantalum CLOSE to the Pic ( on the pic side of your coil )

    << I replaced the secondary winding earth wire with a high-tension lead and a spark plug and attached the earth to the spark plug outer shell >>

    This is "real life" config, it seems ...


    You'll Find attached some "bullet proof" scheme ... moreover, easy to use !!!

    Alain
    Attached Images Attached Images
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
« Previous Thread | Next Thread »

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules