Hi,
Like in Switzerland ...
Oooooooooooooooooooooooone taaaaaaaaaaaaaaaaaaaaaaaaaaaaakes the tiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiime to waaaaaaaaaaaaaaaaaaaaaaatch the relevant chapters of the databookS !!!
or some have a good memory ...
Alain
|
Happy new year, Roger
Hi,
Like in Switzerland ...
Oooooooooooooooooooooooone taaaaaaaaaaaaaaaaaaaaaaaaaaaaakes the tiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiime to waaaaaaaaaaaaaaaaaaaaaaatch the relevant chapters of the databookS !!!
or some have a good memory ...
Alain
************************************************** ***********************
Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
************************************************** ***********************
IF there is the word "Problem" in your question ...
certainly the answer is " RTFM " or " RTFDataSheet " !!!
*****************************************
|
Coooooooooooooooooooooooooool !
Will need to get a faster internet connection then
Merci encore.
BTW, do I understand the datasheets well if, in the case of the "Vref+" and "Vref-" use, "Vref+" can not be higher than Vdd and "Vref-" can not be lower than Vss? Or does "Vref+" and "Vref-" accept any voltage as long as their voltage difference doesn't exceed 5V?
Last edited by flotulopex; - 1st January 2008 at 13:50.
Roger
|
Each Vref have to be >0 and <Vdd
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks