840z Zif Adaptor Problem
HI
Has anyone here got an melabs epic programmer?
i recently purchased the 840Z zif adaptor for it
when i insert the ribbon cable on the adaptor on to the 10 pin header on the programmer
the led on the programmer light's up constantly
and i get the "device does not match the target device" error from my programming software
i get the same problem wether in the 8-20 or 28-40 header.
Has anyone ever had this problem before ? its so annoying ahhhhhhhhhhh
Last edited by -Dan-; - 29th December 2007 at 11:01.
|
i don't have an EPIC, neither any 840z adapter but.. but assuming both male header have different use... is there any chance you have connected the ribbon to the wrong one
Steve
It's not a bug, it's a random feature.
There's no problem, only learning opportunities.
|
I've had both, and the only problem I ever had was plugging onto the WRONG 10 way connector, or failing that, not orienting the target chip the right way around.
Peter Moritz.
Up the bush, Western Plains,
New South Wales,
Australia.
|
did the led on the programmer stay on constantly tho ?Originally Posted by muddy0409
|
Dunno, too long ago to remeber.
Peter Moritz.
Up the bush, Western Plains,
New South Wales,
Australia.
|
Which PIC are you using?
And which way did you plug it in?
See ...
http://www.crownhill.co.uk/images/pr...-datasheet.jpg
<br>
DT
|
yer definately connected to the right onei don't have an EPIC, neither any 840z adapter but.. but assuming both male header have different use... is there any chance you have connected the ribbon to the wrong one
Members who have read this thread : 0You do not have permission to view the list of names.
Posting Permissions
Bookmarks