"hello world" with 18f6680

[dragons_fire]

i have an oscilliscope (sorta)!!! i dont know how to use it or if it will even work... but it was fun to play around with... i want to know what the problem is so i can move on with this project...

thats my oscilliscope in the bottom right corner... its an RCA and meant for back in the tube days....



and if you look close on the shelf, you can see treadbot sitting there!!!

[dragons_fire]

i have juast gone over the board quickly, i will do it again tomorrow when i have more time, but i get:

0 ohms between all +5v traces
0 ohms between all gnd traces
30M ohms between all I/O pins and +5V
1M ohm between power and ground
4-12M ohms between all I/O pins and gnd
17M ohm between OSC2 and gnd
12M ohm between OSC1 and gnd
29M ohms between OSC2 and +5v
23M ohms between OSC1 and +5v

[Darrel Taylor]

I'm jealous!

I want a mill and a lathe and a drill press and a belt sander and a jig saw and a bench grinder and a ... better scope.
<br>

[skimask]

I'm jealous!
I want a mill and a lathe and a drill press and a belt sander and a jig saw and a bench grinder and a ... better scope.
<br>

Don't forget the Get-Away car!

[Darrel Taylor]

Don't forget the Get-Away car!

Yeah, OK.
I want one of those too.

<a href="http://s163.photobucket.com/albums/t305/dragons_fire_photo/?action=view&current=IMG_1917.jpg" target="_blank"><img src="http://i163.photobucket.com/albums/t305/dragons_fire_photo/IMG_1917.jpg" border="0" alt="Photobucket"></a>

[dragons_fire]

i take it you looked at some of the other pics on my photobucket!!! what can i say... i can NEVER have too many tools!!!

[skimask]

Yeah, OK.
I want one of those too.

Which PIC runs that?

It's probably just a matter of time...

[dragons_fire]

there isnt any PICs in it... but i took apart a sunroof motor yesterday that im using for another robot, and it has a 16F72 in it...