Probably another wrong one, but I can't tell from the picture.
Looking at some of the holes, they don't seem to be plated thru.
It could be reflections from the other side or something.
<img src="http://www.picbasic.co.uk/forum/attachment.php?attachmentid=2304&stc=1&d=120158257 0" />
Where it would matter the most (if true) is on the +5V pin on that connector I should have been looking at the first time.
It doesn't have a good solder joint on the top layer, which is the side the trace connects to.
<img src="http://www.picbasic.co.uk/forum/attachment.php?attachmentid=2305&stc=1&d=120158283 4" />
If the thru-hole plating is intact, it probably won't matter.
<br>
Bookmarks