"hello world" with 18f6680

Results 1 to 40 of 92

Threaded View

  1. - 29th January 2008, 01:59 #11
    dragons_fire's Avatar
    dragons_fire
    dragons_fire is offline Member
    Join Date
    Apr 2006
    Location
    Alberta Canada
    Posts
    166

    Did you find this post helpful? Yes | No

    Default



    theres the image of the board, and i will attach the eagle file here too.

    i labelled all the "important" pins. the rest go to I/Os.... and MCLR2 resistor, is a 1Mohm resistor, and its for PGM. i just didnt relabel it when i put it in there... and there was an issue with the gnd side of the caps, so i ran a jumper wire from there to the ground pin..
    Attached Files Attached Files
    Last edited by dragons_fire; - 29th January 2008 at 02:02.
« Previous Thread | Next Thread »

Similar Threads

  1. 18f6680 N/C
    By mackrackit in forum Off Topic
    Replies: 2
    Last Post: - 29th April 2008, 20:21
  2. need help with "hello world" in hyperterm
    By ericmiles in forum Serial
    Replies: 3
    Last Post: - 31st October 2007, 15:08
  3. 18F6680 and portd problems.
    By jkbh in forum mel PIC BASIC Pro
    Replies: 10
    Last Post: - 6th June 2005, 10:54

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules