Servo not reaching full travel

Results 1 to 40 of 40

Threaded View

  1. - 29th December 2007, 10:05 #31
    Acetronics2's Avatar
    Acetronics2
    Acetronics2 is offline Fanatical Contributor
    Join Date
    May 2004
    Location
    NW France
    Posts
    3,653

    Did you find this post helpful? Yes | No

    Talking Rtfds !!!

    Hi,

    Just remember this is a DIGITAL Servo, and digital servos have "software" programmed travel limits ...

    from the Datasheet ...

    << This digital servo cannot be used with the following * AM *
    transmitters as the servo neutral signal is: 1310us).
    CONQUEST AM, FG Series (T4FG, T5FGK,T6FG, T6FGK, T7FGK), New Terratop,
    T3EGX, T3PGE, T2NL, T2LGX, T2FR, T2PK series.

    ***** Do not use digital servos with older AM systems *****
    >>

    Some brands, like hitec, sell the programming box to trim your own parameters ( travel, speed ... etc.)

    They also can recognize a valid signal frame ...

    so, shortly said, they do not allow you to make "uncontrolled things" ...

    Once more reading the servo DATASHEET could have helped !!! ...

    Alain
    Last edited by Acetronics2; - 29th December 2007 at 10:32.
    ************************************************** ***********************
    Why insist on using 32 Bits when you're not even able to deal with the first 8 ones ??? ehhhhhh ...
    ************************************************** ***********************
    IF there is the word "Problem" in your question ...
    certainly the answer is " RTFM " or " RTFDataSheet " !!!
    *****************************************
« Previous Thread | Next Thread »

Similar Threads

  1. More Servo Woes
    By chrisshortys in forum mel PIC BASIC Pro
    Replies: 10
    Last Post: - 13th May 2009, 08:40
  2. Problem with 12F629, servo and EEPROM
    By Atom058 in forum mel PIC BASIC Pro
    Replies: 13
    Last Post: - 1st March 2008, 09:53
  3. Servo does not move
    By ruijc in forum General
    Replies: 12
    Last Post: - 12th November 2007, 19:14
  4. Beginner + Servo
    By james in forum mel PIC BASIC Pro
    Replies: 3
    Last Post: - 31st July 2007, 21:31
  5. Help with Servo Control Please!
    By wireman22 in forum mel PIC BASIC Pro
    Replies: 7
    Last Post: - 7th June 2007, 18:15

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules