Quote Originally Posted by Jacques View Post
Hi Guys, I have a issue which is driving me nuts...

When I connect either one of my flash drives to the VDIP module, nothing happens...

When I apply VCC 5V to the device the leds blinks alternating then stops this happens when i start the module in spi or FIFO mode with or witout my flash drives. However when i start the module in UART the led's blinks continuously even when i connect my flash drives.

1) Both my flash drives are not working with the VDIP, because they work perfectly on the pc
2) my VDIP is blown, but also unlikely because i can re flash is using my rs323rl board.

Does anyone had this led issue or what to do when vdip does not recognize your flash drives.

Help will be greatly appreciated
hi Jacques,

i think the problem is that the VDIP is unable to send bytes (Confirming that it is online) because of its UART Connection. Can you try to connect the CTS of the VDIP to the ground? may be this will solve it.

Best Regards!