Homicidal 877 user needs help

[mackrackit]

Never used an EPIC but this thread looks like a similar problem. Post 5 by Bruce.
http://www.picbasic.co.uk/forum/show...t=reading+file

And if I am reading your hex file correctly, the osc is set for RC?

[b1arrk5]

Dave,
How do you know where in the hex file the oscillator setting is? I was proud of myself because I could count to ten in hexadecimal, but now I'm just amazed that you could decipher that. You gave me a good idea though, David could go under View in the EPIC programmer window, and post exactly what the configuration is set to, and then look under Options as Bruce suggests in the other post regarding the re-read file setting.

Jerry.

[mackrackit]

If I did it right.
Opened MPLAB, set the Pic Being used, import the hex and see what MPLAB has for the configuration.

This may not be the best way but it seems to work.