Hi Andre-

This is a PBP Forum, right? Then you should be looking to use a PBP enhanced IDE, and IMHO there is no question that Microcode MCS is the answer. For PBP, it is simple, quick, elegant. Also, be aware that MCS can use the MPLAB assembler (for 18F) as well as their own assembler (16F). The Microchip MPLAB IDE is optimised for C programmers, and as Steve says, is full of bloat. You can integrate PBP into MPLAB, but I find the operation clumsy.

Hope that this helped

regards

Angus Anderson