16F913 setup

Results 1 to 32 of 32

Thread: 16F913 setup

Threaded View

  1. - 17th April 2010, 22:51 #30
    PulsarProFX's Avatar
    PulsarProFX
    PulsarProFX is offline Junior Member
    Join Date
    Apr 2010
    Posts
    5

    Did you find this post helpful? Yes | No

    Default MicroCode Studio alternative?

    [QUOTE=LinkMTech;88500]I found that the PIC16F913 INC file didn't have all the configs listed and had to use the meProg, View, Configuration screen to set the configs from before flashing the device.

    How were you able to send the program to your 16F913? Are you using Microcode Studio or something else. My "chip listing" for the 16F series only goes up to 16F88 on the non-pro version 3.0.0.5 and the same for the MCS Pro version. Is there something wrong on my end or does MCS not support this 16F913 series chip. I upgraded to PBP 2.6 just because it had this chip that I have to use!

    Frank
    Last edited by PulsarProFX; - 17th April 2010 at 23:47. Reason: Not enough info to qualify the question.
« Previous Thread | Next Thread »

Similar Threads

  1. ADCIN - setup of ADCON2
    By Lowell314 in forum mel PIC BASIC Pro
    Replies: 0
    Last Post: - 7th December 2009, 18:41
  2. TMR1 external LP xtal setup check
    By comwarrior in forum mel PIC BASIC Pro
    Replies: 4
    Last Post: - 13th October 2009, 18:11
  3. ADCIN setup for PIC16F688
    By PixController in forum mel PIC BASIC Pro
    Replies: 0
    Last Post: - 29th February 2008, 18:38
  4. ADCIN setup help need
    By dangill in forum mel PIC BASIC Pro
    Replies: 4
    Last Post: - 26th February 2008, 15:22
  5. Use Button For setup
    By tump in forum mel PIC BASIC Pro
    Replies: 14
    Last Post: - 21st November 2007, 19:43

Members who have read this thread : 0

You do not have permission to view the list of names.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules