Diseqc control anyone ?

[RFsolution]

Hi

I was wondering if someone has already made a project to control a 2 or 4 way diseqc
antenna switch

As i dont want to reinvent "the wheel" maybe someone can share his project

Thanks

[F1CHF]

HI ... RF solution ..
It seems that nobody has done something on this subject (DISECQ commands from a PIC)
Do you find "a solution" ?
thanks
Francois F1CHF

[Scampy]

I doubt you would get a reply unless the OP still receives notifications as his last post was back in 2014.

[CuriousOne]

I have done it once using soundcard, not PBP

[F1CHF]

Thnks for the replies
Yes it seems that nobody has done something via a PIC solution
I found some example but with Arduino.
Objective is to have a Disecq transmitter not for sat station or LNB
but to program some switchs or drive (and control) an Antenna rotator !
the hardware link could be an ordinary coaxial (power and 22 Khz Disecq)
as usual, it is a project ... number xx ... hi !!!
Francois F1CHF

[CuriousOne]

There are some speciality devices, which can do that.